China Mc-T01 Wireless Waterproof Iron Door Sensor

Product Description

Shenzhen Chitongda Electronic Co.,Ltd.

Address:Block2, Chitongda Group Technology Park, No.108 of Baoshi WestRoad,Shiyan Street, Bao'an District, Shenzhen, China
Website: chitongda.en.made-in-china.com chitongda.en.made-in-china.com Tel:0755-33977007 ,Mobile8615112267762 +8615817395430

MC-T01 Wireless Waterproof Iron Door Sensor

Funcation:

Wireless door magnetic sensor which for door using. Intruder open the door, it will be triggered and send signal to the host.

Wireless Door sensor for Alarm System (L&L-108MS-W)

Wireless door magnetic sensor which for door using. Intruder open the door, it will be triggered and send signal to the host\

It has switch from: N.O / N.C

1: Power requirement: DC=12V-8.4V(A23DC=12Vbattery inside)
2: Current consumption: Less than 20uA; Less than 15mA while transmitting
3: Transmit frequency: 433/315+_0.2MHz
4: Transmit duration: More than 1s
5: Transmit distance from host: More than 80m(no obstacle) less than 15mm between part A and Part B
6: Temperature: -10 to 40 degree
7: Humidity: Less than 90%

8: code: 2262 ,1527

9: Switch form: N.O / N.C

10: Transmit distance from host: 500m (in the open area)

How to choose and use an alarm system

Now there are so many kinds of home alarm system products in the market that you may not know how to choose the most suitable. Here we have some suggestions about how to choose and use an alarm system for you.

Knowing whether you need a wired system or a wireless one. Normally we recommend wireless system because it is much easier for you to install.
Knowing a complete alarm system not only includes the common burglar alarm, but also includes fire alarm(smoke alarm), panic alarm, and environmental Alarm.
Count the number of doors and windows of your house which a burglar may access. Your alarm system should cover all the entrances in your house.
If you are pet owner, we recommend you to use pet friendly PIR motion sensor to immunity your pet. Because pet can even trigger a false alarm.
Decide if you need Smoke sensor, Gas sensor, Wireless Flash Siren to beef up your alarm system.
Find a proper place to install the alarm panel.
If you have problem of installation after reading user manual, it is better to ask for help rather than a faulty installation.
The first step in eliminating false alarms is to find out what is causing them(the cause for it), such as faulty installation, loose door/window contacts, low batteries or some other equipment issues.
Whether you are leaving your house for a few short minutes, working from home during the day or vacationing on the other side of the world, your alarm system should be armed and ready to alert you at all times.